The requirement has to
survive every handoff.
In oil & gas and equipment manufacturing, a governing requirement passes through datasheets, sizing calculations, BOMs, and turnover documents — re-read and re-keyed at every step, and every step is a chance to drift. standrdX validates each handoff against the standards and specifications that govern it, resolves which requirement takes precedence, and cites the evidence on every finding — reviewed and signed off by your engineers.
Different documents. Same failure. A requirement changed hands and nobody checked.
Datasheets, P&IDs, BODs, and sizing calculations validated against your owner standards and codes — spanning international codes, standards, and material specs — with owner specifications and project addenda layered on top, and the governing clause cited on every finding.
standrdX extracts the stated requirements from the customer specification, checks the sizing and selection against them, and validates the BOM against your own product data — before it reaches the floor, not after fabrication.
The Challenge
Every document is internally correct — and still contradicts the one before it.
Nothing in industrial engineering gets built from one document. A requirement passes through many hands, in many documents, at many stages — and manual review checks each document on its own, not against the one it came from. That's where the miss lives: not inside a document, but in the handoff between them.
The governing requirement is layered
Owner standards and codes, customer specifications, and project addenda that override one another. For an OEM datasheet, a customer specification can tighten or contradict a pump-standard clause line by line — and which one governs decides whether the deliverable passes.
- HierarchyAddendum overrides parent standard automatically
- ScopeOverrides bound to the exact clause and class
- TraceableEvery override cites the source addendum row
reduction in manual review effort
the governing clause and evidence source on every finding
findings your engineers approve, override, and sign off
every decision made and recorded by a person, reproducible
What standrdX reads
Every standard that governs oil & gas — and every specification that governs your equipment.
standrdX comes pre-indexed with the international codes that anchor oil & gas engineering, from process piping to rotating equipment. Layer your owner standards, customer specifications, and project addenda on top — standrdX resolves the override hierarchy automatically and cites the governing requirement on every finding.
Selected material hardness for the pump wetted parts exceeds the customer specification for sour service — which tightens the pump-standard default.
"The sour-service material standard requires wetted materials not exceed 22 HRC in sour service — this order's customer specification takes precedence over that default."
Oil & Gas Compliance Solution Brief
How Payoda compresses owner codes and international standards compliance across refinery and petrochemical assets, owner specs, sour-service overrides, and the densest addenda stack in industry.
Validate it on your own documents.
A bounded pilot. One representative standard or customer specification and a handful of your real documents — datasheets, a sizing calc, a BOM. A validated finding you can take straight to quality review, benchmarked against your manual review. No platform commitment.